Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Portsmouth, NH

Overhead Door Garage Door Opener Installation in Portsmouth, NH

New chain, belt, screw-drive and wall-mount openers installed and programmed. Typical cost $350-$800.

Overhead Door Garage Door Opener Installation is one of the most common calls we get. A technician will explain what is wrong and what it will cost before starting, and test the door before leaving. New chain, belt, screw-drive and wall-mount openers installed and programmed. We work on Overhead Door garage door openers of every age, from older models to current lines, and carry or can source compatible parts. Overhead Door-brand openers come from the same company as Genie, the Overhead Door Corporation.

When to call for Overhead Door garage door opener installation

  • The opener is more than 10-15 years old
  • No photo-eye sensors or rolling-code security
  • Loud chain noise under a bedroom
  • You want Wi-Fi control or a battery backup

Common causes

  • Worn motors and boards
  • Outdated security and safety features

Safe checks before you call

  • Measure your door height, since tall doors need a rail extension.
  • Check for a grounded outlet near the motor location.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

Our Overhead Door garage door opener installation process

  1. Help you choose a drive type and horsepower for your door
  2. Remove the old opener
  3. Install the rail, motor, photo eyes and wall control
  4. Program remotes, keypad and smart features
  5. Set the limits and force and test the auto-reverse

Typical Overhead Door garage door opener installation prices

$350-$800Typical range, parts & labor
2-3 hoursTypical time on site

What moves the price:

  • Drive type: chain, belt, screw or wall-mount
  • Whether the fix is a part or a whole new opener
  • Remotes, keypads and smart accessories
  • Ceiling height and rail extensions

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Overhead Door services

Serving Portsmouth, NH and nearby towns

Cold weather thickens the grease in an opener's gears and rail, so a door that strains or reverses only in winter often needs force adjustment and cold-rated lubrication, not a new opener.

Besides Portsmouth (ZIP codes 03801, 03802, 03803 and 03804), we handle Overhead Door garage door opener installation in Kittery, ME (1.3 mi), South Eliot, ME (2.4 mi), Rye (4.4 mi) and Greenland (4.7 mi). Call (833) 435-8883 to book a visit in Portsmouth.

Overhead Door Garage Door Opener Installation: frequently asked questions

How much does Overhead Door garage door opener installation cost in Portsmouth, NH?

Overhead Door Garage Door Opener Installation typically costs $350-$800 including parts and labor, and usually takes 2-3 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Overhead Door garage door opener installation the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Overhead Door garage door opener installation covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Overhead Door warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where New Hampshire or Portsmouth requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my opener?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the opener is near the end of its life, replace it. Most openers last 10 to 15 years. If yours is older than that, lacks photo eyes or rolling-code security, or needs a logic board or motor, a new opener is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Portsmouth, NH

Torsion Spring Replacement

Torsion springs replaced and wound correctly, with high-cycle upgrades available.

Typical $200-$450

Steel Garage Door Repair

Dents, rust and bent sections on steel doors repaired or replaced.

Typical $150-$600

Hörmann Off-Track Garage Door Repair

Hörmann is a German manufacturer of residential and commercial doors and openers with North American operations.

Typical $175-$450

Haas Door Garage Door Installation

Haas Door, based in Wauseon, Ohio, makes residential and commercial sectional and rolling doors.

Typical $1,200-$4,500

Garaga Weather Seal Replacement

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $100-$300

Ryobi Opener Gear & Sprocket Replacement

Ryobi's garage door opener can use the brand's 18V ONE+ batteries as backup power and has accessory ports for add-ons.

Typical $125-$275

Garage Door Tune-Up & Maintenance

A full inspection, lubrication and adjustment to prevent breakdowns.

Typical $90-$200

Clopay Garage Door Cable Repair

Clopay is one of the largest residential garage door makers in North America, with lines such as Classic, Modern Steel, Coachman and Canyon Ridge. The model is usually printed on a label on the door's end stile, which helps us match replacement panels.

Typical $150-$350

Raynor Garage Door Sensor Repair

Photo-eye sensors realigned, rewired or replaced so the door closes reliably.

Typical $100-$250

Richards-Wilcox Torsion Spring Replacement

Torsion springs replaced and wound correctly, with high-cycle upgrades available.

Typical $200-$450

Carriage House Garage Doors

Carriage-style doors in steel, composite and wood, with decorative hardware.

Typical $2,000-$8,000

Wayne Dalton Extension Spring Replacement

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $150-$350

Garage door stuck, noisy or broken?

Talk to a garage door technician in Portsmouth, NH now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote